Exposed aggregate specialists
Exposed Aggregate Across Melbourne’s South-East
Exposed aggregate is our specialty. We pour and finish driveways, patios, pool surrounds and paths across Cranbourne, Langwarrin, Frankston, Casey, Greater Dandenong and the Mornington Peninsula.
The top layer of the concrete is washed back to reveal the natural stone. The result is a textured, non-slip surface that suits modern builds, older homes and everything in between.
Every job starts with a free quote. Call 0488 568 597 or send the form at the bottom of this page.
Driveways
Hard-wearing and slip-resistant, with natural stone showing through. Recent driveways include 380 sqm in Frankston South and 250 sqm in Camberwell.
Entertaining Areas and Patios
A textured, non-slip surface for barbecues, outdoor dining and everyday living, finished to suit your home.
Pool Surrounds
Grip underfoot when wet, with aggregate and colour chosen to suit the pool and the surrounding garden.
Paths and Walkways
A practical, good-looking route to the front door or around the house, poured to the same standard as the driveway.
Choosing Your Aggregate and Colour
The stone and the base colour set the look of the finish. A recent 380 sqm job in Frankston South used an off-white Hy-Tec aggregate that stayed consistent in colour across the whole pour. We talk through the options for your home when we visit to quote.
How We Pour Exposed Aggregate
- Excavate and level the site for a stable base
- Reinforce with heavy-duty steel mesh
- Set the formwork to define the shape
- Pour in one continuous, wet-on-wet pour, using a pump on large jobs
- Wash back the surface to expose the stone
- Cure, with sealing available for extra protection
Built for Local Soils and Drainage
Parts of Langwarrin and Pearcedale have sandy loam soils, so reinforcement matters. Many driveways also have drainage requirements, and we have poured exposed aggregate driveways to suit them, including at Junction Village. We can also assist with council crossovers where required.
Recent Exposed Aggregate Jobs
- Frankston South: 380 sqm driveway and perimeter
- Camberwell: 250 sqm driveway transformation
- Murrumbeena: modern classic driveway for a vintage home
- Cranbourne: new home driveway on a slight gradient
- Junction Village: drainage-compliant driveway
What Does Exposed Aggregate Cost?
Cost depends on the area, access, site preparation, aggregate and colour. Our concrete jobs start from $8,800 for plain concrete. For an exposed aggregate price, call 0488 568 597 or send the quote form and we will quote it free.
Exposed Aggregate FAQs
How long does a large driveway take?
Large jobs typically take 3 to 5 days.
Is exposed aggregate slippery?
No. The exposed stone gives a non-slip surface, which is why it suits driveways and pool surrounds.
Can it be sealed?
Yes. Sealing is optional and adds protection.
Do you handle council crossovers?
Yes, where required.
Which areas do you service?
Cranbourne, Langwarrin, Frankston, Clyde, Berwick, Narre Warren, Pakenham, the Mornington Peninsula and Greater Dandenong. We have also poured in Lang Lang.
Ready to start? Call 0488 568 597 or send the quote form below.